Centrifugal Double Net Filter-manufacture,factory,supplier from China

Principle: when the water flows through the conical tank, it will rotate and generate centrifugal force, so that the sediment and solid particles with higher density in the water resources will enter the sand settling tank, and the clear water enters the Y-shaped net filter from S-bend (C-bend) for secondary filtrationPrecautions:1. The centrifugal filter sand tank is equipped with a sand discharge port.

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

The net filter is a kind of precision equipment which uses the filter screen to directly intercept impurities in water and oil and other liquids, removes suspended matter and particles in water and oil , reduces turbidity, purifies water quality and oil quality, reduces the generation of system dirt, bacteria, algae and rust, etc., so as to purify water quality, oil quality and protect other equipment in the system.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

The net filter is a kind of precision equipment which uses the filter screen to directly intercept impurities in water and oil and other liquids, removes suspended matter and particles in water and oil , reduces turbidity, purifies water quality and oil quality, reduces the generation of system dirt, bacteria, algae and rust, etc., so as to purify water quality, oil quality and protect other equipment in the system.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

The net filter is suitable for the irrigation of vegetables, fruit trees, greenhouse, flowers, tea garden, green land and various crops in the field. It can save water, save energy, improve plant quality, improve product grade, maintain ecological balance and benefit the country and the people. It is a necessary irrigation product for the transformation from traditional agriculture to modern agriculture.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

The net filter is suitable for the irrigation of vegetables, fruit trees, greenhouse, flowers, tea garden, green land and various crops in the field. It can save water, save energy, improve plant quality, improve product grade, maintain ecological balance and benefit the country and the people. It is a necessary irrigation product for the transformation from traditional agriculture to modern agriculture.Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Precise filtration: Filter discs with different precisions can be selected according to the water requirements. There are 20 microns, 55 microns, 100 microns, 130 microns, 200 microns, 400 microns and other specifications, and the filtration ratio is greater than 85%.Thorough and efficient backwashing: Because the filter pores are completely opened during backwashing, and the centrifugal jet effect is added, the cleaning effect that other filters cannot achieve can be achieved.

Use and maintenance instructions1. Check the condition of the pressure gauge to see if it is working properly.2.

Plastic filters are mainly used for irrigation with better water quality or in combination with other forms of filters when the water quality is poor, as final filter equipment. The mesh filter is suitable for water purification and filtration in water-saving irrigation such as drip irrigation, micro-sprinkler irrigation, and small-pipe outflow irrigation in greenhouses, greenhouses, small farmland, landscaping, flower cultivation and other fields. The main models are: Φ32, Φ40, Φ50, Φ63.

16mm double lock-nut bypass valve and double thread bypass switch are made of high-quality engineering plastics. The products are of high quality and durable. This kind of drip irrigation bypass switch adopts double thread form with tight connection, good water locking effect and no water leakage.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

principle:When the filter is working normally, the pressurized water flows into the tank from the water inlet and reaches the filter layer evenly. When the water flows through the filter layer, the impurities are filtered and retained. There is a water trap with a valve at the bottom of the filter, and the filtered water is collected evenly and then flows out of the filtering equipment.With the continuous accumulation of impurities in the filter layer, the water flow loss continues to increase.

Set combinationMultiple combinations can meet your various needsA One-outlet one small straight drip arrow + double hookOne 3 / 5 double barb50cm3/5PVC capillary1 small straight drip arrowOne-outlet one big straight drip arrow + double hookBOne 3 / 5 double barb50cm3/5PVC capillaryOne big straight drip arrowCOne-outlet one curved drip arrow + double hookOne 3 / 5 double barb50cm3/5PVC capillary  One curved drip arrow

The composition of ground-inserting micro-sprinkler, inserting rod, capillary, capillary double joint and epsilon-type adapter.Micro-sprinkler: the ground-inserting micro-sprinkler generally adopts the ground-inserting refraction atomization micro-sprinkler or the ground-inserting double-sided wheel micro-sprinkler with better atomization effect, so as to provide better atomization effect or larger spraying radius and meet different needsInserting rod: it is inserted into the ground for fixing, as a support for the ground-inserting micro-sprinkler.

Suitable for spray irrigation and drip irrigation 16mm PE pipePurpose: used for 16mm PE pipe connecting PE main pipe, PVC main branch bypass joint switch

Functional features:Communication mode of solenoid valve: WBUS (2-wire system, no polarity, 3km)HMI: 12.1"touch screen displayMultiple irrigation areas: maximum 120, single area irrigation time in irrigation area: 4 stagesIt can be irrigated at regular time and quantitatively, or the irrigation can be set up according to temperature and solar radiation4 start times can be set for each irrigation area every day4 filter backwash (4 dry contacts) can be controlled at regular timeEmergency irrigation: one-key irrigation function (emergency irrigation)Temporary stop: one-key sto

The drip irrigation belt uses a plastic pipe (drip irrigation pipe lead) to send water through the orifice or dripper on the capillary tube with a diameter of about 10mm to the root of the crop for local irrigation. It is a dripper or drip irrigation belt with a very small outlet orifice, which drips water evenly and slowly into the soil near the roots of the crops.1. The built-in dripper has its own filter window, which has good anti-blocking performance.2. Turbulent flow channel design. Water evenly.3. The dripper and pipeline have strong integrity,4.

 It is suitable for PE water supply pipe and PVC water supply pipe as the main pipe of drip irrigation. The branch pipe is suitable for 16mm PE coil pipe, 16 drip irrigation pipe, micro-spray irrigation 16 capillary pipe 16 PE pipe, etc.Installation steps: drill 8 mm hole in the main water supply pipe, insert the bypass valve, rotate the lock-nut, and connect the 16mm end with the drip irrigation tape. Tip: after drilling holes on PE pipe and plastic hose, directly insert and install it.

Purpose: it is usually used in drip irrigation system, when PE soft tape is used as main (branch) pipe, and the soft tape three-way is used as water separation device to connect with drip irrigation tape. That is, the irrigation system uses soft tape as low-pressure water transmission pipeline, and uses soft tape three-way to connect with soft tape , and then connects with drip irrigation tape through the reversed lock-nut on the soft tape three-way, and supplies water to drip irrigation tape of both sides, thus forming rapid and accurate irrigation of water source.

Product features: scientific design, high strength, good sealing, convenient connection, easy disassembly, strong flexibility, easy recycling, and beautiful appearance. It is made of engineering plastics and has a long service life.

Instructions for use: used for the connection and front-end control of the water delivery belt and the drip irrigation belt (one end of the valve is connected to a 16mm drip irrigation belt, which is fixed by a screw lock; the other end is connected to the main water delivery belt)How to use: First use a hole punch (14mm in diameter) to punch holes on the side of the soft water belt, then rotate the bypass valve of the drip irrigation belt into the hole of the soft belt, tighten the nut to fix the bypass on the soft water belt, and on the other side Just connect the drip tape.

Model: Φ16mmMaterial: PEProduct advantages and characteristics:1.Scientific design, compact size, light weight, good sealing and interchangeability.2.Simple structure, convenient operation, quick connection and disassembly, strong flexibility, easy to recycle, beautiful and practical.3.Stable chemical properties, excellent performance, good cold-resistance, anti-aging, long service life.4.Compact size, light weight, good sealing and interchangeability.5.It is suitable for various working conditions and widely used in various media such as gas, liquid, powder, etc.